Eurovalve Process Valves

Bronze and cast iron gate valve range

All of our Bronze Gate Valves are inside screw pattern with either rising or non-rising stem configuration.
The majority of the range have a threaded bonnet.
Valve bodies are made from bronze castings, with DZR as an option.

Iron Gate Valves are available in two basic types; Inside Screw and Outside Screw with Yoke type. The Inside Screw type is usually used for non-corrosive and reasonably clean services and has a smaller overall height than its outside screw counterpart which can be used on a more active media where the fluid might have an adverse affect on the thread.

Gate valve specifications
Type	Material	Product range	Applications
Gate	Ferrous	PN6, 10, 16, 25 and ANSI 40 to 600mm flanged 40 to 300 mm GroovEnd® Cast and ductile iron body materials Non rising and rising stem designs Metallic and resilient wedge sealing Non rising and rising stem designs Handwheel and gearbox operation Kitemarked products WBS approved products	Hvac Applications Chilled water LTHW MTHW Portable water Oil General isolation
Gate	Bronze	PN16 to PN32 and ANSI Series A and B ¼" to 4"threaded ends 15 to 100 mm flanged ends 15 to 54mm compressed ends Bronze and DZR body materials Non rising and rising stem designs Handwheel and lockshield operation Kitemarked products WBS approved products	Hvac Applications Chilled water LTHW MTHW Portable water Domestic hot water Oil General isolation