Globe Valves

All Bronze Globe Valves are inside screw, rising stem pattern. Both union and screwed bonnet valves are available with a variety of seat and disk combinations including the Vee Reg® design for steam regulation and isolation. All valve bodies are made from bronze castings.

Straight pattern Globe Valves are available in cast and ductile iron; outside screw with rising stem and are normally used for low-pressure steam isolation. The cast steel oblique pattern with outside screw and rising stem can also be supplied with characterized plug and double regulating feature for isolation and regulation on HTHW service.

Globe Valve Specifications
Type	Material	Product range	Applications
Globe	Bronze	PN16, 32, 40 ANSI, Class 200 - 300 Series A and B ¼" to 3" threaded ends 15 to 80 mm flanged ends Bronze body material Standard, oblique and needle patterns Rising stem designs Vee Reg® seats Handwheel operations Kitemarked products	Steam isolations Steam regulations Chilled water Compressed air Air venting HTHW isolation Oil General isolation
Globe	Ferrous	PN16, 25, 40 and ANSI 50 to 300mm flanged 65 to 300 mm GroovEnd® Cast and ductile iron and steel body materials Standard and oblique patterns Non rising and rising stem designs Handwheel and operation Kitemarked products	Steam isolation Steam regulation Compressed air HTHW isolation Oil

Valves

Knifegate
Plug
Butterfly
Ball
Gate
Globe
Flow control
Check
Direct solenoid

Actuators

Pneumatic
Electric
Electro-hydraulic
Switch boxes
Solenoids
Positioners

Miscellaneous

Pressure switches
Gauges
Fittings
Steam equipment
Plastic equipment
Refurbishment